Machining Centers
VESTA-2000
VESTA-2000 is recommended for powerful cutting based on its stable structure.
It is equipped with Hwacheon's proprietary technologies such as productivity enhancement software (HECC, HTLD and OPTIMA) and precision enhancement software (HTDC and HAI) and provides differentiated quality different from existing machining center for parts.
Main features
Tough Machine Structure
VESTA-2000 minimized deformation with high rigid C-type frame and FEM analysis.
High-Performance Spindle
The spindle with the direct-coupled motor(standard) does not have any other power transmission components, delivering motor rotations, power, and torque directly to the tool with out loss. Bearings are coated with semi-permanenet grease-lubricant and the air curtain completely prevents contamination, while jacket-circulation spindle frame cooling system minimizes thermal displacement.
High-Precision Feed Drive
VESTA-2000 applied LM guide for high precision when moving in high speed. Especially 4 guide way on Y-axis will support wide materials and increase precision.
Specifications
|
Item |
Unit |
VESTA-2000 (BT-40) |
VESTA-2000 (BT-50) |
|
Stroke (X / Y / Z) |
mm |
2,000 / 850 / 800 |
|
|
Rapid Speed (X / Y / Z) |
m/min |
24 / 24 / 24 |
|
|
Table Size (W x L) |
mm |
2,000 x 850 |
|
|
Table Loading Capacity |
kgf |
1,800 |
|
|
Max. Spindle Speed |
rpm |
10,000 (Opt 1: 12,000 - Opt 2: 15,000) |
8,000 |
|
Spindle Motor |
kW |
18.5 / 11 |
15 / 11 |
|
Type of Tool Shank |
- |
BT-40 |
BT-50 |
|
Tool Storage Capacity |
ea |
30 |
24 |
|
Floor Space (Length x Width) |
mm |
5,980 x 3,698 |
|
|
Weight |
kgf |
12,700 |
13,900 |
|
NC Controller |
Fanuc 0i Plus |
||
Mounting software
Hwacheon Tool Load Detect System
"Detect and diagnose the most minute of tool-end point movement"
HTLD constantly monitors the tool wear to prevent accidents, which may occur from a damaged tool and help to stop tool wear from deteriorating the workpiece.
(The load is measured every 8 msec to ensure accuracy.)
Hwacheon High Efficiency Contour Control System
"Roughing quickly, finishing is precisely"
HECC offers an easy to use programming interface for different workpieces and different processing modes.
The system provides a precise,custom contour control for the selected workpiece, while prolonging the life of the machine and decreasing process time. The customizable display provides real-time monitoring and quick access.
Cutting Feed Optimization System
"Maximize your productivity with intelligent system"
OPTIMA utilizes an adaptive control method to regulate the feed rate in real time, to sustain the cutting load during a machining process. As a result the tools are less prone to damage and the machining time is optimized.
Hwacheon Spindle Displacement Control System
"Real-time correction for the displacement in the spindle"
When the spindle rotates at high speed, the centrifugal force drives the taper to expand, causing errors in Z axis. HSDC constantly monitors the temperature at each spindle region and makes optimal prediction for thermal displacement.
The system then makes necessary adjustments and eff ectively minimizing thermal displacement.
Hwacheon Frame Displacement Control System
“System for maintaining processing accuracy for a long period of machining"
HFDC is equipped with highly sensitive thermal sensors in the casting region where thermal activity is suspected; monitoring and correcting displacement.
Hwacheon Thermal Displacement Control System
"Hwacheon Spindle Displacement Control System
+ Hwacheon Frame Displacement Control System"
HTDC integrates the Hwacheon Spindle Displacement Control system and the Frame Displacement Control System.
Process Sample
Engine Block / Automobile / Aluminum
Carrier / Automobile / FCD-450
Frame / Refrigerator-Compressor / GC-250
Frame / Refrigerator-Compressor / GC-250
